Why is my zigzag stitch sewing straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
What tension should I use for zig zag stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What settings should I have my sewing machine on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
How do you fix the zigzag stitch?
Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my sewing machine thread bunching up?
What should I do if I experience thread bunching? As “thread bunching” occurs on the underside of the fabric, some people think it is due to the lower thread. They check whether the bobbin is sitting correctly in the bobbin case or even replace the bobbin. … On many models, the upper thread tension is set automatically.
Can you do a zig-zag stitch with a walking foot?
Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.