Why is my needle not catching my bobbin?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do I get the bobbin thread to come up with my brother?
While lightly holding the upper thread with your left hand, press (Needle position button) twice to lower and then raise the needle. The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull out the end of the bobbin thread.
Why do we need to thread the machine correctly?
THREADING THE MACHINE
Each part of the threading mechanism on the head of a sewing machine has a definite purpose in guiding the thread from the spool to the needle. The thread must pass through the various guides in a given order so that the machine will sew properly the formed stitches.