Your question: Do you thread the bobbin through the needle?

Should bobbin thread go through needle?

The thread enters the tension spring of the bobbin case. Pass the bobbin thread through the slot. Do not cut the thread with the cutter. While lightly holding the upper thread with your left hand, press (Needle position button) twice to lower and then raise the needle.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why isn’t my needle catching the bobbin thread?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

What weight is embroidery bobbin thread?

Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. And, a higher weight number means a thinner thread.

THIS IS AMAZING:  What can I make with 200 yards of bulky yarn?

What is bobbin fill thread?

What is Bobbin Fill? Quite simply, it’s a lightweight thread that you wind on to your bobbin. You use this thread when using an embroidery thread for embroidery or decorative stitches.