Why is my zigzag stitch sewing straight?

Why is my sewing machine not sewing zig zag stitches?

Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.

What tension should I use for zig-zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

How do you adjust a zig-zag stitch?

Zig zag stitch can be adjusted by changing the settings on the machine. A higher number on your stitch length makes the zig-zag longer and the width dial will indicate the width of the stitch and change it to wider or narrower.

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.

THIS IS AMAZING:  What are the best free motion quilting gloves?

What is the most common use for the zigzag stitch?

One of the most common uses for the zigzag stitch is to sew stretchy materials. When sewing a material that stretches, such as knitted fabrics and neoprene, it’s essential to use a stitch that can stretch with the fabric.

What width should my sewing machine be on?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

Does a zig zag stitch stretch?

A zigzag stitch is a great way to seam knit fabrics. Its inherent stretch allows for the fabric to stretch and move without fear of popping a seam. On light to medium weight knits, try using a stitch length of 1.5 and a width of 5.

Why are stitches not straight?

1. The presser foot you are using is incorrect. – Attach the presser foot that is correct for the type of stitch you want to sew.

Why does my top stitch look wrong?

Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.