Why is my sewing machine not sewing correctly?

Why does my sewing machine keep jamming underneath?

However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.

Why does my bottom thread keep bunching?

If the thread has knots, is not smooth, is uneven, or is loose on the bobbin, then it has not been threaded correctly. If your machine uses a bobbin case, follow your sewing machine’s instructions to remove the bobbin from the case and re-thread it.

How do you fix a sewing machine that will not move?

Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken. If the drive belt is okay, an internal drive gear failure is likely preventing the needle from moving.

THIS IS AMAZING:  You asked: What is the GSM of quilting cotton?

How do you tighten thread tension?

Changing Bobbin Tension

You should see a small screw on the flat/closed side of the bobbin case. Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension.