Why can’t I pull the bobbin thread up?

What do you do if your bobbin thread won’t catch?

Your Needle Is Not Inserted Correctly

If your needle is not being held in all the way, it won’t be in the right place to grab your bobbin thread. Make sure your needle is inserted all the way up and tightened as much as possible. Also, make sure not to insert your needle backward on your sewing machine.

Why won’t my sewing machine needle go up and down?

A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. … If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken.

Why does my sewing machine keep getting jammed?

If your bobbin is threaded wrongly, it could cause jamming issues to your sewing machine. Your bobbin thread won’t move properly if there are knots or if the bobbin isn’t properly wound. Check to see if the threading on your bobbin is all tangled, and fix it if you can.

Why won’t my sewing machine wind a bobbin?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

THIS IS AMAZING:  What size beads for 0 8 mm string?

How do you tighten thread tension?

Changing Bobbin Tension

You should see a small screw on the flat/closed side of the bobbin case. Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension.