Why is my stitching wonky?
When the bobbin case is threaded wrong, the upper thread and the lower one do not work in sync, forming uneven stitch or uneven feed among layers of fabric. Check the bobbin case and re-thread if needed. The thread should pass through the thread side slot in the case before being brought up to the needle.
Why do my stitches look weird?
Here’s an example of what straight stitches look like with varying tensions. When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy.
Why does my top stitch look wrong?
Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.
How do you cover up bad stitches?
There are a number of options:
- Make a ruffly flower. Cut a long strip of fabric, sew along one edge and gather. It will start to curl around itself. …
- Applique something over the hole.
- Hide it with lace or ribbon.
- Make a bow and sew it over the top.
- Hide it with a decorative button.
- Sew a contrasting band over it.
What should sewing machine stitches look like?
Machine stitches should look the same on both sides of the seam when you sew patchwork pieces together or when you. … The little knot formed between stitches (at each indentation between them) should be invisible, buried in the layers.
Why is my bottom stitch messy?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
What is the best stitch length for machine quilting?
For straight stitching, it is advised to set your machine’s stitch length to 2.5 to 3.0 or about 8-12 stitches per inch. This range works quite well for a majority of machine quilting but there are always exceptions when you make a rule. For threads with sparkle or shine, use a longer stitch length.
Why is my top thread not sewing?
The machines top thread may not be threaded correctly. – Check the threading path of the top thread and rethread your machine. 2. Make sure the needle thread is behind the needle bar thread guide on the needle bar.
Why are my stitches so small?
With the stitch length changing there are a couple of possibilities for you to investigate: Is the thread catching somewhere in the path to the needle and then coming ‘un-caught’? … That increased tension causes smaller stitches. Though usually, at some point, the thread will break.
What stitch length and tension should I use?
What stitch length should I use?
| What is the best stitch for: | Suggested Stitch Length (mm) | Stitches Per Inch |
|---|---|---|
| Standard Stitch Length | 2.5 – 3.0 | 8 – 10 |
| Basting stitch | 5.0 – 7.0 | 4 – 5 |
| Stay-stitching | 1.5 – 2.0 | 12 – 8 |
| Top-stitching – light/medium weight | 3.0 – 3.5 | 7 – 8 |