How does tension affect embroidery?
Proper bobbin tension is essential to good embroidery. If tension is too tight, unwanted bobbin thread may begin to show on top of your garment and you may begin to experience frequent thread breaks which wastes time and money. Bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps).
How do I know what thread tension to use?
Give a little jerk on the thread and if the bobbin case slides down slightly, then the tension if perfect. If it drops freely, then it’s too loose. If it doesn’t move at all, then it’s too tight.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why does my embroidery look messy?
These embroidery machines are designed to pull the top thread down to the back and cut both the bobbin and needle thread at once. This process does leave a set of tails on the back side of the fabric. … So much so, that the threads being cut start to look messy on the back.
Can embroidery be fixed?
As you’ve read, fixing embroidery mistakes can be easily done. You can remove stitches based on the stitch type used, fix embroidery mistakes by using scissors or other embroidery tools, or if you’ve stained your garment or embroidery, there are stain removal techniques based on the supplies you’ve used.
Why is my embroidery stitching loose?
If the top thread or bobbin thread is improperly threaded it can cause looping stitches. If your machine is threaded correctly, check the thread tension. Loose thread tension will create loose loops of thread that can cause the needle to catch and create more of a mess.