What is a three step zigzag stitch?

What does zigzag mean in sewing?

A zigzag stitch is variant geometry of the lockstitch. It is a back-and-forth stitch used where a straight stitch will not suffice, such as in reinforcing buttonholes, in stitching stretchable fabrics, and in temporarily joining two work pieces edge-to-edge.

Does a zig zag stitch stretch?

A zigzag stitch is a great way to seam knit fabrics. Its inherent stretch allows for the fabric to stretch and move without fear of popping a seam. On light to medium weight knits, try using a stitch length of 1.5 and a width of 5.

What should my stitch width be?

What stitch length should I use?

What is the best stitch for: Suggested Stitch Length (mm) Stitches Per Inch
Standard Stitch Length 2.5 – 3.0 8 – 10
Basting stitch 5.0 – 7.0 4 – 5
Stay-stitching 1.5 – 2.0 12 – 8
Top-stitching – light/medium weight 3.0 – 3.5 7 – 8

What is a zigzag stitch good for?

The Zig-Zag Stitch is a very versatile stitch. Use it for seam finishing, applique, bartacks, satin stitching and more. For some sewing techniques with this stitch, it can be helpful to use a Satin Stitch Foot to help prevent the fabric from puckering.

Why is my zigzag stitch sewing straight?

If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.

THIS IS AMAZING:  How do you set the dials on a Kenmore sewing machine?

Can I use a zigzag stitch with a walking foot?

Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.

What tension should I use for zig-zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.