Which way should the bobbin face?
Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull the thread through the slot (A) and then to the left.
Does it matter which way the bobbin thread go?
The bobbin should be turning clockwise when thread is pulled. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle.
Can I use regular thread for bobbin thread?
As with any sewing thread, quality does make a difference. A quality bobbin thread can be almost as strong as normal sewing thread. Regular weight sewing thread would be used in almost all sewing, but bobbin thread is a welcome addition to your sewing basket when the need arises.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
What weight is embroidery bobbin thread?
Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. And, a higher weight number means a thinner thread.
Why is my bottom thread bunching up?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.