Your question: How do I backup my embroidery machine?

How do you go back on an embroidery machine?

Press the Start/Stop button to stop the machine.

1. Press. …
2. – If the bobbin thread is almost empty, press. …
3. Press .
4. Press , , or to move the needle back the correct number of stitches before the area where the thread broke, and then press .
5. – will go back one stitch at a time.
6. – will go back 10 stitches at a time.

What happens if your bobbin runs out?

When the bobbin begins to run out of thread during embroidering, the machine will stop and the message “The bobbin thread is almost empty.” will appear. If very little sewing remains, you can embroider approximately 10 final stitches without rethreading the machine by pressing “Start/Stop” button.

How do I open embroidery files?

Right-click on the embroidery design file (“. pes” format). Choose [Open with] from the context-menu, and then, choose [Choose default program…]. The Open with dialog will appear.

How do I set up an embroidery file?

Once you’ve chosen your embroidery software follow the steps below.

1. Step 1: Upload Your Logo to the Digitizing Software. …
2. Step 2: Set Embroidery Design Size. …
3. Step 3: Choose Your Stitch Type. …
4. Step 4: Set Stitch Direction. …
5. Step 5: Set Your Embroidery Thread Colors. …
6. Step 6: Transfer the File to Your Embroidery Machine.