Why do my stitches look weird?
Here’s an example of what straight stitches look like with varying tensions. When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy.
Why does my top stitch look wrong?
Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.
What is the best stitch length for machine quilting?
For straight stitching, it is advised to set your machine’s stitch length to 2.5 to 3.0 or about 8-12 stitches per inch. This range works quite well for a majority of machine quilting but there are always exceptions when you make a rule. For threads with sparkle or shine, use a longer stitch length.
Why are my sewing machine stitches wonky?
The Problem: Stitches are coming out uneven or skipping entirely. THE SOLUTION: Odds are, the secret culprit here is a needle that is broken, bent, or otherwise damaged. Experts recommend that you replace your needles for every 16 hours of stitching time.
How do you cover up bad stitches?
There are a number of options:
- Make a ruffly flower. Cut a long strip of fabric, sew along one edge and gather. It will start to curl around itself. …
- Applique something over the hole.
- Hide it with lace or ribbon.
- Make a bow and sew it over the top.
- Hide it with a decorative button.
- Sew a contrasting band over it.
Why is my bottom stitch messy?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my top thread not sewing?
The machines top thread may not be threaded correctly. – Check the threading path of the top thread and rethread your machine. 2. Make sure the needle thread is behind the needle bar thread guide on the needle bar.