Why does the fabric not feeding properly?
There are several things that can be checked that could cause the fabric not to feed. Check the stitch length to see if it is set at no feeding (0), if so, reset the stitch length to between 2 and 3. Check your needle is not damaged. Insert a new needle; making sure the flat side of the needle is toward the back.
What to do when sewing machine is not sewing?
Machine is not sewing any stitches while trying to sew
- The machines top thread may not be threaded correctly. …
- Make sure the needle thread is behind the needle bar thread guide on the needle bar.
- The thread may be knotted or tangled. …
- The thread may be too thick for the needle.
Why are my feed dogs not working?
If the feed dogs are not coming up to move the fabric, check to see if there is a setting that has lowered the feed dogs; if so, return them to their proper setting. If there is no such setting on your machine, take off the throat plate and clean out all dust, thread, and lint.
Why wont my needle go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. … You’ll typically need to have a service technician examine the sewing machine and fix a drive gear failure.
Why does my bobbin keep getting stuck?
This can be caused if the top thread tension is too tight, or if the bobbin thread is not in the bobbin case tension. … Make sure the bobbin is correctly seated in the bobbin case (bobbin holder), and check that the upper thread tension is not set too tightly.