Why does my fabric keep getting stuck in my sewing machine?
A massive nest of tangled thread is usually a result of the sewing machine being improperly threaded. Just because the tangled mess is on the bobbin side of the stitching, don’t assume the fault lies with the bobbin. To correct this problem, put the presser foot up and unthread the sewing machine entirely.
Why won’t my sewing machine needle go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. … If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken.
Why do sewing machines lock up and won’t sew?
Thread bunched up in the shuttle race often causes the sewing machine to lock up. … Clean lint and debris out of the shuttle race; they can prevent the needle from hooking the thread, resulting in thread bunching up in the shuttle race and jamming the needle.
How do you get a sewing needle unstuck?
Raise the needle to the highest position using the hand wheel. If the needle will not move, gently work the hand wheel back and forth a little bit to see if the needle loosens.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.