What is wrong with my Overlocker?

Why is my Overlocker not working?

When you overlocker is not stitching right, it could be that the blades need changing. … If this threading is wrong, then your overlocker will not form a chain or even a stitch. After that, check your tension settings when you start threading the machine. If they are not already set to 0 do so before threading.

Why does my Overlocker keep Unthreading?

Your Sewing Machine Thread Tension Could Be Off

One of the most common issues leading to a needle that keeps unthreading is a sewing machine with the wrong thread tension in place. Thread tension at the top that’s either too high or too low can result in this issue.

Why does my Overlocker skip stitches?

Machine skips stitches . Insert a new needle – it may be bent or blunt and Insert needle correctly. Wrong needle size – Change needle to correct size for fabric thickness. Check threading – Rethread with care.

What thread should I use for Overlocker?

For perfect results on your overlocker and coverstitch machine it is essential to use a good quality thread that is lint free. For that reason we only stock the highest quality Polyester 120’s and 180’s overlocking thread.

Why are my Serged seams wavy?

In my experience, the dreaded wavy seam is most often a result of serging more than two layers of fabric together like when attaching cuffs, waistbands, and neckbands. In this tutorial, I’m serging four layers of a thick double knit fabric together.

THIS IS AMAZING:  What kind of scrapbook should I get?

How do you stop a serger from gathering?

Turn the dial (typically on the top of the machine, above the needle area) down to lower the pressure. If the presser foot pressure is too low, the seam may start gathering as the fabric isn’t being pulled through the machine.