What is a zigzag stitch good for?
The Zig-Zag Stitch is a very versatile stitch. Use it for seam finishing, applique, bartacks, satin stitching and more. For some sewing techniques with this stitch, it can be helpful to use a Satin Stitch Foot to help prevent the fabric from puckering.
What is a narrow zigzag stitch?
A narrow zigzag is a zigzag that’s almost a straight stitch. It has just enough wobble to it to give the stretch the fabric needs, but it looks a little less homemade than a regular zigzag on your hem. Narrow zigzags are also a great choice for ultra stretchy knits (i.e. those with tons of spandex).
What is the most common use for the zigzag stitch?
One of the most common uses for the zigzag stitch is to sew stretchy materials. When sewing a material that stretches, such as knitted fabrics and neoprene, it’s essential to use a stitch that can stretch with the fabric.
What tension should I use for zig-zag stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Can you do a zigzag stitch with a walking foot?
Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.
Why is my zig-zag stitch straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
What is the normal stitch width?
What stitch length should I use?
|What is the best stitch for:||Suggested Stitch Length (mm)||Stitches Per Inch|
|Standard Stitch Length||2.5 – 3.0||8 – 10|
|Basting stitch||5.0 – 7.0||4 – 5|
|Stay-stitching||1.5 – 2.0||12 – 8|
|Top-stitching – light/medium weight||3.0 – 3.5||7 – 8|
What width should my sewing machine be on?
A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.