Why is my bobbin thread showing on top Janome?
When you see the bobbin thread come through to the top, this means that there is no tension on the bobbin thread to hold it back. Try removing and reinserting/rethreading the bobbin in the bobbin case. … Improper bobbins can be too tight or loose in the bobbin case.
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do I adjust the bobbin tension on my embroidery machine?
The bottom row of samples is the underside for each A:
- Too tight. Adjust the screw in quarter turns in an anti-clockwise direction to loosen it.
- Too loose. Adjust the screw in quarter turns in a clockwise direction to tighten it.
What do you do when the bobbin thread is on top?
– If the upper tension is too tight the bobbin thread with be showing on the top side of the material. Press the minus key on the screen to loosen the tension. – If the upper tension is too loose most of the upper thread will be showing on the bottom the material.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
Does bobbin thread have to be the same color?
You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item. … Your bobbin thread should not show through the top layer of stitching.
Why is my embroidery machine not lining up?
Embroidery design alignment issues can happen for a variety of reasons. … Your designs may not line up because of improper hooping, if you’ve hooped the fabric too loosely or too tightly.