Question: How do you make holes in clay beads?

How do you drill polymer clay beads?

Using light pressure, drill into the polymer clay with a piece of wood behind it as a back stop, and you should get a pretty clean hole. Drill from the back as well as the front, to clear any burrs along the edges of the hole. Resin coated polymer clay pendants can also be drilled after baking.

Can you drill a hole in air dry clay?

While air-dry epoxy clays harden the best (and fastest)—becoming tough enough to drill holes in it without creating cracks—other air-dry clays can be fragile and prone to cracking. … When it dries, air-dry clay is porous.

How long should you cook polymer clay?

Sculpey, preheat to 275 degrees F (135 C). Bake for 30 minutes per quarter inch of thickness. It is suggested that thicker pieces be initially baked for 15 minutes, then another 5 minutes, another 5 minutes, etc. The clay needs at least 15 minutes to cure properly.

What do you use to make holes in polymer clay beads?

Use the drinking straw to create a hole in your polymer clay bead by gently pushing and twisting the straw through the center of the bead. Remove the straw and place the metal bead hole into each end of your bead. Reshape your bead around the large bead hole insert as needed.

THIS IS AMAZING:  How do you make yarn locs less stiff?

How do you make wooden bead holes bigger?

How to Fix Beads with Too-Small Holes: Bead Reamer, Pearl Reamer & More

  1. Jam your needle or wire through the bead, often resulting in frustration and a broken bead.
  2. Throw the bead over your shoulder (like with salt, it’s considered good luck).
  3. Use a tool, such as a bead reamer, to enlarge the hole.