How do you sew a zigzag for beginners?

What should the tension be for a zig zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

What is zigzag stitch for?

A zigzag stitch is variant geometry of the lockstitch. It is a back-and-forth stitch used where a straight stitch will not suffice, such as in reinforcing buttonholes, in stitching stretchable fabrics, and in temporarily joining two work pieces edge-to-edge.

Why is my zig-zag stitch straight?

If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.

What width should my sewing machine be on?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

Can I use a zigzag stitch with a walking foot?

Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.

THIS IS AMAZING:  Your question: How do you get rust off a bobbin case?

Does a zig zag stitch stretch?

A zigzag stitch is a great way to seam knit fabrics. Its inherent stretch allows for the fabric to stretch and move without fear of popping a seam. On light to medium weight knits, try using a stitch length of 1.5 and a width of 5.